Dd-wrt is free linux-based firmware for several wireless routers, most notably the linksys wrt54g (including the wrt54gl and wrt54gs) and buffalo whr-g54s,. Jul 20, 2015 - La direccin IP: es un valor entre que este habilitada 2. AP (Wireless Broadband Router) MODO SERVIDOR para varios (Access Point). Seal y con una omni exterior repetirla en modo repetidor universal, y otra consulta. Mi CPE 5210g est en 192.168.1.254 y mi Linksys WRT54G est en 192.168.0.1. Setting-Up Wireless Repeater Mode on the WAP54G Checking the Wireless MAC Address of a Wireless Router NOTE: If you will connect the wireless repeater to another WAP54G, click. To check the wireless MAC Address of the wireless router follow the steps below. Step 1: Access the router’s web-based setup page. For instructions, click. NOTE: If you are using Mac® to access the router’s web-based setup page, click. Step 2: When the router’s web-based setup page opens, click Status then click Wireless. Step 3: Take note of the MAC Address. This is your router’s wireless MAC address. NOTE: The Wireless MAC Address you took note of will be entered on the WAP54G set as wireless repeater. After checking the wireless MAC Address, set-up the wireless repeater mode on the WAP54G. For instructions, click. To check the wireless MAC address of the access point, follow the steps below. Checking the Wireless MAC Address of an Access Point Step 1: Connect a computer to the access point. Step 2: Assign a static IP address on the computer. For instructions, click. NOTE: To assign a static IP address on a wired Mac, click. Step 3: Open the access point’s web-based setup page. For instructions, click. NOTE: If you are using Mac to access the access point’s web-based setup page, click. Step 4: When the access point’s web-based setup page opens, take note of the Wireless MAC Address. NOTE: The Wireless MAC Address you took note of will be entered on the WAP54G set as wireless repeater. Step 5: After obtaining the wireless MAC address of the router/access point, configure the other WAP54G as a wireless repeater. For instructions, follow the steps below. Setting-Up Wireless Repeater Mode on the WAP54G Step 1: Access the access point’s web-based setup page. For instructions, click. NOTE: If you are using Mac to access the access point’s web-based setup page, click. Step 2: When the access point’s web-based setup page opens, click AP Mode then select Wireless Repeater. NOTE: The access point’s web-based setup page may differ depending on the access point’s version number. Step 3: Type the wireless MAC address you took note of earlier in the Remote Access Point’s LAN MAC Address field. NOTE: Remove the colons (:) when typing the MAC address on the Remote Access Point’s LAN MAC Address field. Step 4: Click. NOTE: If you will connect the wireless repeater to another WAP54G, change the wireless repeater’s LAN IP address. For instructions, click. Related Articles. Belkin International, Inc., including all affiliates and subsidiaries (“Belkin”, “us” or “we”) thanks you for choosing one of our Belkin, Linksys or WeMo products (the “Product”). This End-User License Agreement (this “Agreement”) is a legal document that contains the terms and conditions under which limited use of certain Software (as defined below) that operates with the Product is licensed to you. PLEASE READ THIS AGREEMENT CAREFULLY BEFORE INSTALLING OR USING THIS PRODUCT. BY CHECKING THE BOX OR CLICKING THE BUTTON TO CONFIRM YOUR ACCEPTANCE WHEN YOU FIRST INSTALL THE SOFTWARE, YOU ARE AGREEING TO ALL THE TERMS OF THIS AGREEMENT. Mephisto subliminal s mp3 player. ALSO, BY USING, COPYING OR INSTALLING THE SOFTWARE, YOU ARE AGREEING TO ALL THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT CHECK THE BOX OR CLICK THE BUTTON AND/OR DO NOT USE, COPY OR INSTALL THE SOFTWARE, AND UNINSTALL THE SOFTWARE FROM ALL DEVICES THAT YOU OWN OR CONTROL. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT AND YOU PURCHASED A PRODUCT CONTAINING THE SOFTWARE FROM AN AUTHORIZED RETAILER, RESELLER OR APP STORE (AS DEFINED BELOW), YOU MAY BE ELIGIBLE TO RETURN THE PRODUCT FOR A REFUND, SUBJECT TO THE TERMS AND CONDITIONS OF THE APPLICABLE RETURN POLICY. This product is Software licensed to you by Belkin and, where applicable, by Belkin’s suppliers. “Software” means any and all firmware programs and associated files provided with respect to the Product; any and all software programs, applications or “apps” and associated files provided with respect to the Product; all modified versions of and upgrades or improvements to such programs (such as those provided via web-based updates), all subsequent versions of such programs, and all copies of such programs and files. Software does not include any Open Source Software (as defined below). By “you,” we mean the purchaser, recipient or other end user of the Product containing the Software or the purchaser, recipient or other end user of the Software on a standalone basis.
0 Comments
Leave a Reply. |